over ons │ tentoonstelling │ sitemap │ bladwijzer │ contact│ naar huis│ Nederlands
Machine Tools Directory MachineTools
naar huis > Close Loop Injectie > CHUAN LIH FA MACHINERY WORKS CO., LTD. > specificatie
 

CHUAN LIH FA MACHINERY WORKS CO., LTD.
CHUAN LIH FA MACHINERY WORKS CO.werd opgericht in 1966 en startte met slechts vijf medewerkers in een gehuurde fabriek voor de productie van spuitgietmachines.We hebben aangedrongen op de business principe van eerlijkheid en de volledige verantwoordelijkheid voor al onze klanten en het betalen van een voorzichtige houding ten opzichte van de strenge machine-ontwerp , efficiënte productie en strenge kwaliteitscontrole om te voldoen aan onze klanten 100% tevredenheid.

web | Produkty powiązane | VIDEO

 
           


AE Series
  		Please visit our on-line digital catalogs for details.


 

Features
  1. Employs Germany Siemens control and servo motors for excellent performance and high accuracy.
  2. High performance injection unit that enhances the exceptional features of servo control. High speed, stability and accuracy are guaranteed.
  3. In-house software development capability combined with technical support from Siemens.
  4. Standardized hardware design reduces inconvenience of maintenance and parts stock.
  5. Simultaneous control on multi-axes shortens molding cycle time dramatically.


MACHINE MODEL CLF-40AE CLF-80AE CLF-120AE CLF-180AE
INTERNATIONAL CODE 400H-100E 800H-140E 1200H-270E 1800H-46E
Injection Unit Screw Diameter mm 22 25 25 28 30 35 35 40 45
Theoretical Inj. Volume cm3 38 49 54 68 99 135 173 226 286
Injection Pressure kg/cm2 2634 2040 2560 2040 2730 2006 2664 2040 1612
Inj. Holding Pressure kg/cm2 2239 1734 2176 1734 2321 1705 2265 1734 1370
Injection Speed mm/sec. 300 300 300 300 300 300 300 300 300
Injection Rate cm3/sec. 114 147 147 185 212 289 289 377 477
Shot Weight In GPPS grams 34 44 49 61 89 122 156 204 258
Screw Rotating Speed RPM 350 350 350 300
Clamping Unit Distance Between Columns (H x V) mm 315 x 315 380 x 380 460x 410 510 x 510
Dimensions Of Platens mm 465 x 465 560 x 560 660 x 630 765 x 765
Mold Height Max./Min. mm 320 / 160 370 / 170 450 / 150 500 / 200
Mold Opening Stroke mm 260 315 360 450
Clamping Force Tons
(KN) 		40 80 120 180
Dia. Of Locating Ring mm 100 100 100 125
Ejector Stroke mm 60 80 100 120
Ejector Force Tons
(KN)		 1.5 2.5 3.3 4
General Data Heating Zones zone 5 5 6 6
Heating Capacity kw 3.9 3.9 5 7.9
Machine Dimensions
(L x W x H) 		m

3.5 x 1.1 x 1.7

4 x 1.2 x 1.8 5 x 1.54 x 1.7 5.17 x 1.65 x 2
Net Weight Tons 3 4.1 4.3 7.5

MACHINE MODEL CLF-230AE CLF-285AE
INTERNATIONAL CODE 2300H-460E 2300H-785E 2850H-758E 2850H-1190E
Injection Unit Screw Diameter mm 35 40 45 40 45 50 40 45 50 50 55 60
Theoretical Inj. Volume cm3 173 226 286 264 334 412 264 334 412 491 594 707
Injection Pressure kg/cm2 2664 2040 1612 2974 2350 1903 2974 2350 1903 2420 2000 1680
Inj. Holding Pressure kg/cm2 2265 1734 1370 2528 1997 1618 2528 1997 1618 2057 1700 1428
Injection Speed mm/sec. 300 300 300 280 280 280 280 280 280 250 250 250
Injection Rate cm3/sec. 289 377 477 352 445 550 352 445 550 491 594 707
Shot Weight In GPPS grams 156 204 258 238 301 372 238 301 372 443 536 638
Screw Rotating Speed RPM 300 300 300 250
Clamping Unit Distance Between Columns (H x V) mm 560 x 560 610 x 610
Dimensions Of Platens mm 860 x 860 940 x 940
Mold Height Max./Min. mm 550 / 200 650 / 250
Mold Opening Stroke mm 550 600
Clamping Force Tons
(KN) 		230 285
Dia. Of Locating Ring mm 125 125
Ejector Stroke mm 150 150
Ejector Force Tons
(KN)		 5.2 6.2
General Data Heating Zones zone 6 6 6 6
Heating Capacity kw 7.9 10.1 10.1 13.9
Machine Dimensions
(L x W x H) 		m 5.45 x 1.75 x 2.1 6.2 x 1.7 x 2.1 6.8 x 1.8 x 2.2 7 x 1.8 x 2.2
Net Weight Tons 9 10 12 14

MACHINE MODEL CLF-350AE CLF-450AE
INTERNATIONAL CODE 3500H-785E 3500H-1190E 4500H-1190E 4500H-1585E
Injection Unit Screw Diameter mm 40 45 50 50 55 60 50 55 60 55 60 65
Theoretical Inj. Volume cm3 264 334 412 491 594 707 491 594 707 665 792 929
Injection Pressure kg/cm2 2974 2350 1903 2420 2000 1680 2420 2000 1680 2380 2000 1704
Inj. Holding Pressure kg/cm2 2528 1997 1618 2057 1700 1428 2057 1700 1428 2023 1700 1449
Injection Speed mm/sec. 280 280 280 250 250 250 250 250 250 200 200 200
Injection Rate cm3/sec. 352 445 550 491 594 707 491 594 707 475 565 664
Shot Weight In GPPS grams 238 301 372 443 536 517 443 536 638 600 714 839
Screw Rotating Speed RPM 300 250 250 220
Clamping Unit Distance Between Columns (H x V) mm 730 x 730 810 x 810
Dimensions Of Platens mm 1120 x 1120 1260 x 1260
Mold Height Max./Min. mm 700 / 300 800 / 300
Mold Opening Stroke mm 680 800
Clamping Force Tons
(KN) 		350 450
Dia. Of Locating Ring mm 160 160
Ejector Stroke mm 150 180
Ejector Force Tons
(KN)		 7 10
General Data Heating Zones zone 6 6 6 8
Heating Capacity kw 10.1 13.9 13.9 16.5
Machine Dimensions
(L x W x H) 		m 7 x 1.9 x 2.3 7.2 x 1.9 x 2.3 8.2 x 2.2 x 2.35 8.5 x 2.2 x 2.35
Net Weight Tons 20 23 25 28
Verwante Producten
Company Profile
 
naar huis > Close Loop Injectie > CHUAN LIH FA MACHINERY WORKS CO., LTD. > specificatie
English Türk 日本語 bahasa Indonesia Español française العربية Русский ไทย Nederlands Việt italiano Português Deutsch 한국의